BJCYL - COATING,EPOXY-POLAMIDE CLR,CMPNTII C86-0063

  • MSDS: BJCYL
  • Manufacturer: STRATHMORE PRODUCTS INC
  • Product Name: COATING,EPOXY-POLAMIDE CLR,CMPNTII C86-0063
  • National Stock Number: 8010-01-031-8835
Product Identification

Product ID:COATING,EPOXY-POLAMIDE CLR,CMPNTII C86-0063
MSDS Date:08/29/1990
FSC:8010
NIIN:01-031-8835
Kit Part:Y
MSDS Number: BJCYL

Responsible Party
STRATHMORE PRODUCTS INC
1970 W FAYETTE ST
SYRACUSE, NY 13201
US

Emergency Phone: 315-488-5401 /315-476-4766

Info Phone: 315-488-5401

Cage: GO043

Contractor
STRATHMORE PRODUCTS INC
151 SYRACUSE, NY 13201 US

Telephone: (315) 488-5401 OR (315) 476-4766

Cage: GO043

Ingredients

TOLUENE

CAS: 108-88-3

Fraction By Weight: 15%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ETHYL ACETATE (SARA III)

CAS: 141-78-6

RTECS: AH5425000

Fraction By Weight: 29%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 19%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 2%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALE:ANESTHETIC IRRIT OF RESP
TRACT OR ACUTE NERVOUS SYS DEPRESSION(HEADACHE, DIZZINESS,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS OR COMA.)EYE & SKIN:
IRRITATION. INGEST: IRRIT, NAUSE, DIA RRHEA, VOMITING, POSSIBLE
FATAL PNEUMONITIS. CHRONIC: AFFECT CNS, RESP IRRIT, LIVER AND
KIDNEY DAMAGE.
Explanation of Carcinogenicity:DOES NOT CONTAIN 0.1% OR MORE OF ANY
SUBSTANCE LISTED AS A CARCINOGEN BY NTP, IRAC, OR OSHA
Effects of Overexposure:PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING MAY
BE HARMFUL OR FATAL. SKIN: DRYING AND DEFATTING. MAY LEAD TO
DERMATITIS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN, EYE, AND
RESPIRATORY DISORDERS

First Aid

First Aid:INHALE: REMOVE FROM EXPOSURE. RESTORE BREATHING, KEEP WARM
AND QUIET. GET MD. EYES: FLUSH IMMED W/ COPIOUS AMTS OF WATER. GET
MD. SKIN:WASH AFFECTED AREA W/ WATER. REMOVE CONTAMINATED CLOTHING.
GET MD .

Fire Fighting

Flash Point Method:SCC
Flash Point:34.0F,1.1C
Lower Limits:1.1
Extinguishing Media:USE NAT'L FIRE PROTECTION ASSOC NFPA CLASS B EXTIN
(C0*2, DRY CHEM OR ALCHOL FOAM) FOR NFPA CLASS 1B FOR LIQUID FIRES
Fire Fighting Procedures:WEAR SCBA. H*20 MAY BE USED TO COOL CLOSED
CONT. TO PREVENT PRESSURE BUILD UP & POSSIBLE AUTO IGNTN OR EXPLSN
WHEN EXPOSED TO EXT HEAT. USE FOG NOZZLE.
Unusual Fire/Explosion Hazard:KEEP CONTRS TIGHTLY CLOSED.ISOLATE FROM
HEAT,ELEC EQUIP,SPARK AND OPEN FLAME.CLOSED CONTRS MAY EXPLODE WHEN
EXPOSED TO EXT HEAT.DO NOT APPLY TO HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE W/ INERT ABSORBENT AND
NON-SPARKING TOOLS. TRANSFER TO APPROPRIATE CONTAINER FOR DISPOSAL.
KEEP OUT OF SEWERS, STORM DRAI NS, SURFACE WATER & SOIL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BLDGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DO NOT FLAME-CUT,
BRAZE OR WELD W/O NIOSH /MSHA APPROVED RESP OR APPROPRIATE VENT.
FLAMMABLE, VAPOR HAR MFUL. KEEP AWAY FM HEAT,SPARKS,FLAME.

Exposure Controls

Respiratory Protection:OPEN AREA: MSHA/NIOSH APPROVED MECH FILTER
RESP.RESTRICTED VENT AREA:MSHA/NIOSH APPROVED CHEM-MECH FILTERS TO
REMOVE PARTICULATE & VAPOR. CONFINED AREA: MSHA/NIOSH AIR LINE TYPE
RESP OR HOODS.
Ventilation:GEN. DILUTION OR LOCAL EXHAUST VENT IN VOL&PATTERN TO KEEP
TLV BELOW LIMIT, LEL BELOW STATED LIMIT, AND RMV DECOMP. PROD
Protective Gloves:SOLVONT RESISTANT
Eye Protection:SAFETY EYEWEAR TO PROTECT AGAINST S
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:175F,79C
Vapor Pres:0.6 MM/HG
Vapor Density:HEAVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:80.7

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:AVOID FUMES, SMOKE AND CARBON MONOXIDE
AND/OR CARBON DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE I/A/W FED, STATE & LOCAL REGS.
INCINERATE IN AN APPROVED FACILITY. DO NOT INCINERATE CLOSED
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.